There’s no quicker way to give your board a fresh new look (and feel) than swapping out the grip tape. Whether you’re restoring an old deck or just want a visual upgrade, regripping your board is simple, if you follow the right steps.

To help you nail it first time, we’ve put together a quick how-to guide to get your board gripped properly.

🎥 Watch the full video here:

How to Regrip Your Evolve Board

What You’ll Need

    •    Replacement grip tape (Evolve grip tape recommended)

    •    Stanley knife or sharp blade

    •    Flat tool (like a plastic card or metal scraper)

    •    Patience and a steady hand

Steps to Regrip Your Board

    1.    Remove the old grip

Carefully peel off the existing tape. If it’s stubborn, use a hairdryer or heat gun to soften the adhesive underneath.

    2.    Clean the deck surface

Wipe off any remaining glue or debris so the new tape sticks cleanly and evenly.

    3.    Line up the new grip tape

Take your time here. Lay it out to ensure it’s centred and properly aligned with the contours of your deck.

    4.    Apply and smooth it down

Starting from one edge, press the grip tape down firmly and smooth out air bubbles as you go.

    5.    Trim the edges

Use your blade to trim the excess tape neatly along the board’s outline. Go slow for a clean finish.

Once it’s on, you’re good to go. Your board will look sharper, feel grippier, and be ready for a new season of carving.

Need grip tape or tools? Grab yours here