If you’ve just purchased a new Phaze remote(I bought new controller but i dont know how can I connect to new controller) and are unsure how to connect it to your board, here’s a quick step-by-step to get you rolling.

🔧 Pairing the Phaze Remote to Your Board (e.g. Diablo)

1. Turn your board ON using the power button.

2. Power ON the remote — you’ll see a Pair Remote screen on the LCD.

3. Hold the MODE 1 button for one second until the Bluetooth icon begins flashing.

4. The remote will pair automatically. Once complete, the screen will display your speed dial and enter SAFE mode.

⚠️ Important Tips

• Do not touch the accelerator or brake triggers during pairing.

• After pairing, lift the wheels and test the throttle and brake to ensure everything responds correctly.

• If there’s any lag or no response, turn both the board and remote off and repeat the pairing process.

If you’re pairing to a Diablo, this guide applies directly. For other boards or remotes (e.g. R2 or Wi-Fi versions), please let us know and we’ll send the correct steps for your model.